- Ultra lightweight seamless polyamide/spandex shell with soft sandy NBR palm coating
- Highly sensitive grip with form fitting liner for the most precise handling
- Excellent grip in dry or oily conditions
- Sizes 7–11
Esko Black Hawk Nitrile Glove
Home / Hand Protection / Coated Gloves / Esko Black Hawk Nitrile Glove
EN 388:2003
The standard for certifying protective gloves against mechanical risks. The numbers under the shield represent (L to R) resistance to abrasion, cut (coup test), tear and puncture.
EN 388:2016
Updates the EN 388:2008 standard. It continues the previous test’s methods with some alterations including a change to the way the coup cut test is carried out (the second figure giving the coup cut resistance rating may be expressed as 'X' if the glove is not tested under the coup test or if the rolling blade becomes blunt before the test is completed). It adds a fifth letter (A to F, with F being highest) for cut resistance using the sliding blade TDM test and a sixth letter to indicate impact protection, expressed as 'P' for pass. If the glove is not designed to provide impact protection the sixth figure is left out, or sometimes 'F' (fail).
- General handling
- Tyre fitting
- Painting
- Warehousing/distribution
- Assembly/fabrication
- Electrical
Pack quantity/MOQ: 12 pairs
Carton quantity: 120
Carton quantity: 120
Esko Black Hawk Nitrile Glove
Product Code: E420
To continue to download files, you must agree to the terms and conditions of use
agreement.
Esko Limited own all intellectual property rights in the images and other content on this website. You may not copy, download or otherwise use any images or other website content except by agreement with the following terms of use:
- Esko Limited (Esko) are the owners of all rights, title and interest in and to the images and any other content made available to download, including all trade marks featured in any such images or content.
- Images and any other content may only be used or re-published in connection with fair promotional representation of the relevant Esko products.
- Images must be printed and/or reproduced in a way that maintains their overall quality and resolution.
- Images must remain as provided to you by Esko and you must not make any changes to the images.
- You will provide Esko with information about your use of the images and other content as required by Esko from time to time. Esko may request that you change how you are using any images or other content, and you agree to promptly comply with that request.
- Esko has the right to require users to take down or withdraw from publication any images which it deems inappropriately used, in its sole discretion, and you agree to promptly comply with any such requirement.
- If specifications, colours, packaging, etc of Esko products are changed, or if Esko otherwise considers it desirable or necessary, Esko has the right to require users to remove the images and, if applicable, replace them with new images.
- Esko does not provide any warranties or make any representations about the images or content made available on this website, and your use of the images or other content is at your own risk.
Related products
-
Esko Openside Touchline Glove
Touchline Openside header carded glove, polyamide/spandex with nitrile foam coating, sizes 7–12View -
Esko Polar Bear Full Coat Thermal Glove
Esko Polar Bear dual-lined thermal winter/cold environment glove, fully coatedView -
Esko Polar Bear Thermal Glove
Esko Polar Bear dual-lined thermal winter/cold environment glove, sizes 7-12View -
Esko Grip-It 3/4 Coat Hi-Vis Nitrile Glove
Esko Grip-It, black nitrile 3/4-coated glove with hi-vis yellow nylon liner, sizes 8–11View